Accton Technology ES4626 - Manual (Page 436)

436
13.5.5.1.5 show ipv6 rip
Command: show ipv6 rip
Function: Show RIPng Routing
Command Mode: Any mode
Example: Switch# show ipv6 rip
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B - BGP, a - aggregate, s - suppressed
Network Next Hop If Met Tag Time
R 2000:1:1::/64 :: Vlan2 1 0
R 2001:1:1::/64 fe80::203:fff:fe01:257c Vlan2 2 0 02:40
R 3000:1:1::/64 :: Vlan10 1 0
R 3010:1:1::/64 :: -- 1 0
Amongst R stands for RIP route, namely a RIP route with the destination network
address 2001:1:1::/64, next-hop address at fe80::203:fff:fe01:257c. It is learnt from the
Ethernet port VLAN2 with a metric value of 2, and still has 2 minutes 40 seconds before
time out.
13.5.5.1.6 show ipv6 rip database
Command: show ipv6 rip database
Function: Show messages related to RIPng database
Command Mode: Any mode
Example:
Switch# show ipv6 rip database
13.5.5.1.7 show ipv6 rip interface
Command: show ipv6 rip interface
[]
Function: Show RIPng interface related messages
Parameter: is the name of the interface to be displayed
Command Mode: Any mode
Example: Switch# show ip rip interface Vlan1
Loopback is up, line protocol is up
RIPng is not enabled on this interface
Ethernet1/10 is up, line protocol is up
Routing Protocol: RIPng
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IPv6 interface address:
3000:1:1::1/64
fe80::203:fff:fe01:429e/64