Accton Technology ES4626 - Manual (Page 776)

776
Command Mode: Admin mode
Examples:
Switch#show firewall
fire wall is enable
the default action of fire wall is permit
Displayed information Explanation
fire wall is enable Packet filtering function enabled
the default action of firewall is
permit
Default packet filtering function is permit
18.4.1.4 show time-range
Command: show time-range
Functions: Reveal configuration information of time range functions
Parameters: word assign name of time-range needed to be revealed
Default: None
Command Mode: Admin mode
Usage Guide:
When not assigning time-range names, all time-range will be revealed.
Examples:
Switch#show time-range
time-range timer1 (inactive)
absolute-periodic Saturday 0:0:0 to Sunday 23:59:59
time-range timer2 (active)
absolute-periodic Monday 0:0:0 to Friday 23:59:59
18.4.1.5 show ipv6 access-lists
Command: show ipv6 access-lists [|]
Function: Show the configured IPv6 access control list
Parameter: is the number of specific access control list, the valid range is 500～
699,amongst 500～599 is digit standard IPv6 ACL number,600～699 is the digit extended
IPv6 ACL number; is the nomenclature character string of a specific access
control list, lengthening within 1～16.
Default:
None
Command Mode: Admin Mode
Usage Guide: When no access control list is specified, all the access control lists will be
displayed; in used x time（s） is shown the times the ACL had been quoted
Example:
Switch #show ipv6 access-lists
ipv6 access-list 500(used 1 time(s))