Accton Technology ES4626 - Manual (Page 343)

343
10.6.1.7 DHCP network parameter configuration
Click DHCP configuration, DHCP server configuration, DHCP network parameter
configuration. Users can specify DHCP network parameters. 1.128.240; set Operation
type to Set network parameter, and then click Apply. The configuration is applied on the
switch.
10.6.1.8 Manual address pool configuration
Click DHCP configuration, DHCP server configuration, Manual address pool
configuration.Users can configure DHCP manual address pool:
DHCP pool name -Select DHCP pool name
Hardware address -Specify hardware address.10.1.128.160; set Client network
mask to 255.255.255.0; set User name to 00-00-e2-3a-26-04, and then Apply. The
configuration is applied on the switch.