Accton Technology ES4626 - Manual (Page 257)

257
no policy-map <policy-map-name> map mode; the “no policy-map
<policy-map-name> ” command
deletes the specified policy map.
class <class-map-name>
no class <class-map-name>
After a policy map is created, it can be
associated to a class. Different policy
or new DSCP value can be applied to
different data streams in class mode;
the “no class <class-map-name>”
command deletes the specified class.
set {ip dscp <new-dscp> | ip precedence
<new-precedence>}
no set {ip dscp <new-dscp> | ip
precedence <new-precedence>}
Assign a new DSCP and IP
precedence value for the classified
traffic; the “no set {ip dscp
<new-dscp> | ip precedence
<new-precedence>} ” command
cancels the newly assigned value.
police <rate-kbps>
[exceed-action {drop |
policed-dscp-transmit}]
no police <rate-kbps>
[exceed-action {drop |
policed-dscp-transmit}]
Configure a policy to classify traffic,
data stream exceeding the limit will be
dropped or degraded; the “no police
<rate-kbps>
[exceed-action {drop |
policed-dscp-transmit}] ” command
deletes the specified policy.
mls qos aggregate-policer
<aggregate-policer-name>
exceed-action {drop
|policed-dscp-transmit}
no mls qos aggregate-policer
<aggregate-policer-name>
Define a policy set, perform different
actions to out-of-profile data streams,
such as discard or degrade. This
policy can be used in one policy map
by several classes; the “no mls qos
aggregate-policer
<aggregate-policer-name> ”
command deletes the specified policy
set.
police aggregate
<aggregate-policer-name>
no police aggregate
<aggregate-policer-name>
Apply a policy set to classified traffic;
the “no police aggregate
<aggregate-policer-name> ”
command deletes the specified policy
set.
4. Apply QoS to ports
Command Explanation