Accton Technology ES4626 - Manual (Page 194)

194
5.5.2.2 Commands for Dynamic VLAN Configuration
5.5.2.2.1 dynamic-vlan mac-vlan prefer
Command: dynamic-vlan mac-vlan prefer
Function: Set the MAC-based VLAN preferred.
Parameter: None
Command Mode: Global Mode
Default: MAC-based VLAN is preferred by default
Usage Guide: Configure the preference of dynamic-vlan on switch. The default priority
sequence is MAC-based VLAN、IP-subnet-based VLAN、Protocol-based VLAN, namely
the preferred order when several dynamic VLAN is available. After the IP-subnet-based
VLAN is set to be preferred and the user wish to restore to preferring the MAC-based
VLAN, please use this command
Example: Set the MAC-based VLAN preferred.
SwitchA#config
SwitchA(config)#dynamic-vlan mac-vlan prefer
5.5.2.2.2 dynamic-vlan subnet-vlan prefer
Command: dynamic-vlan subnet-vlan prefer
Function: Set the IP-subnet-based VLAN preferred.
Parameter: None
Command Mode: Global Mode
Default: MAC-based VLAN is preferred by default
Usage Guide: Configure the preference of dynamic-vlan on switch. The default priority
sequence is MAC-based VLAN、IP-subnet-based VLAN、Protocol-based VLAN, namely
the preferred order when several dynamic VLAN is available. This command is used to
set to preferring the IP-subnet-based VLAN
Example:
Set the IP-subnet-based VLAN preferred.
Switch#config
Switch(config)#dynamic-vlan subnet-vlan prefer
5.5.2.2.3 mac-vlan
Command: mac-vlan mac vlan priority
no mac-vlan {mac |all}
Command Explanation
Global Mode
dynamic-vlan mac-vlan prefer
dynamic-vlan subnet-vlan prefer
Configure the priority of the dynamic
VLAN