Accton Technology ES4626 - Manual (Page 718)

718
Port Configuration Mode
ipv6 mld access-group
no ipv6 mld access-group
Configure the filter conditions of interface for
MLD group; the NO operation of this
command cancels filter conditions.
（2）Configure MLD Query parameters
1）Configure interval time for MLD to send query messages
2）Configure the maximum response time of MLD query
3）Configure the overtime of MLD query
Command Explanation
Port Configuration Mode
ipv6 mld query-interval
<time_val>
no ipv6 mld query-interval
Configure the interval of MLD query
messages sent periodically; the NO operation
of this command restores the default value.
ipv6 mld
query-max-response-time
<time_val>
no ipv6 mld
query-max-response-time
Configure the maximum response time of the
interface for MLD query; the NO operation of
this command restores the default value.
ipv6 mld query-timeout
<time_val>
no ipv6 mld query-timeout
Configure the overtime of the interface for
MLD query; the NO operation of this
command restores the default value.
3. Shut down MLD Protocol
Command Explanation
Port Configuration Mode
no ipv6 pim dense-mode | no ipv6
pim sparse-mode | no ipv6 pim
multicast-routing (Global Mode)
Shut down MLD Protocol
17.3.3 Commands for MLD
17.3.3.1 ipv6 mld access-group
Commandipv6 mld access-group {<acl_name>}
no ipv6 mld access-group
Function:
Configure the access control of the interface to MLD groups ;the “no ipv6 mld
access-group ” command stops the access control
Parameter: is the name of IPv6 access-list