4 show ip dvmrp neighbor – Accton Technology ES4626 User Manual
Page 655
655
Switch #show ip dv in vlan4
Address Interface Vif Ver. Nbr Type Remote
Index Cnt Address
13.1.1.3 Vlan1 1 v3.ff 0 BCAST N/A
10.1.35.3 Vlan2 0 v3.ff 0 BCAST N/ASwitch #
Displayed Information
Explanations
Address Address
Interface Interface
corresponding physical interface
name
Vif Index
Virtual interface index
Ver
Interface supporting version
Nbr Cnt
Neighbor count
Type Interface
type
Remote Address
Remote address
16.4.5.1.4 show ip dvmrp neighbor
Command: show ip dvmrp neighbor [{<ifname>
[detail]}|{ <ifname>[detail]}|detail]
Function:
Display DVMRP neighbor.
Parameter:
is interface name, namely displaying neighbor information of
specified interface.
Default:
Do not display (Off).
Command Mode:
Any Configuration Mode
Example:
Display interface vlan1 neighbor on Ethernet.
Switch #show ip dvmrp neighbor
Neighbor Interface Uptime/Expires Maj Min Cap
Address Ver Ver Flg
10.1.35.5 Vlan2 00:00:16/00:00:29 3 255 2e
Displayed Information
Explanations
Neighbor Address
Neighbor address
Interface
Detect the neighbor’s interface
Uptime/Expires
The neighbor uptime/expire time
Maj Ver
Major version
Min Ver
Mini version
Cap Flg
Capacity flag