Accton Technology ES4626 - Manual (Page 600)

600
Command: ip igmp snooping vlan <vlan-id> query-mrsp <value>
no ip igmp snooping vlan <vlan-id> query-mrsp
Function: Configure the maximum query response period. The “no ip igmp snooping
vlan <vlan-id> query-mrsp ” command restores to the default value
Parameter: vlan-id : vlan id , ranging between <1-4094>
value : query interval, ranging between <1-25> seconds
Command Mode:Global mode
Default: 10s
Usage Guide:
It is recommended to use the default settings. Please keep this configure
in accordance with IGMP configuration as possible if layer 3 IGMP is running.
Example: Switch(config)#ip igmp snooping vlan 2 query-mrsp 18
14.3.9 ip igmp snooping vlan query-robustness
Command: ip igmp snooping vlan query-robustness <value>
no ip igmp snooping vlan query-robustness
Function: Configure the query robustness. The “no ip igmp snooping vlan
query-robustness ” command restores to the default value
Parameter: vlan-id
: vlan id , ranging between <1-4094>
value : query interval, ranging between <2-10> seconds
Command Mode: Global mode
Default: 2
Usage Guide: It is recommended to use the default settings. Please keep this configure
in accordance with IGMP configuration as possible if layer 3 IGMP is running.
Example: Switch(config)#ip igmp snooping vlan 2 query- robustness 3
14.3.10 ip igmp snooping vlan suppression-query-time
Command: ip igmp snooping vlan <vlan-id> suppression-query-time <value>
no ip igmp snooping vlan <vlan-id> suppression-query-time
Function: Configure the suppression query time. The “no ip igmp snooping vlan
<vlan-id> suppression-query-time ” command restores to the default value
Parameter: vlan-id : vlan id , ranging between <1-4094>
value : query interval, ranging between<1-65535> seconds
Command Mode: Global mode
Default:
255s
Usage Guide: This command can only be configured on L2 general querier. The
Suppression-query-time refers to the period of suppression state in which the querier
enters when receives query from the layer 3 IGMP in the segments.