Accton Technology ES4626 - Manual (Page 536)

536
Usage Guide: Checking the IGP accessibility of the route advertised by BGP is to check
the existence of next-hop and its IGP accessibility
Example: Switch(config-router)# bgp network import-check
13.8.3.24 bgp rfc1771-path-select
Command: bgp rfc1771-path-select
no bgp rfc1771-path-select
Parameter: None
Default:
Not following
Command Mode: Global mode
Usage Guide: After this attribute is set, path selecting will follow the way defined in rfc
1771, namely not checking the AS internal METRIC,when different AS exist, which
should be perform without this attribute set.
Example:
Switch(config)# bgp rfc1771-path-select
Switch(config)# no bgp rfc1771-path-select
13.8.3.25 bgp rfc1771-strict
Command: bgp rfc1771-strict
no bgp rfc1771-strict
Function: Set wither strictly follows the rfc1771 restrictions. The “no bgp rfc1771-strict”
command set to not strictly following
Parameter:
None
Default: Not following rfc 1771 restrictions
Command Mode: Global mode
Usage Guide: With this attribute set, generation types of routes from protocols such as
RIP, OSPF, ISIS, etc will be regarded as IGP (internal generated), or else as
INCOMPLETE
Example:
Switch(config)# bgp rfc1771-strict
Switch(config)# no bgp rfc1771-strict
13.8.3.26 bgp router-id
Command: bgp router-id
no bgp router-id []
Function: Configure the router ID manually. The “no bgp router-id []”
cancels this configuration
Parameter: :
Router ID