Accton Technology ES4626 - Manual (Page 34)

34
Chapter 2 Basic Switch Configuration
2.1 Commands for Basic Switch Configuration
Basic switch configuration includes commands for entering and exiting the admin
mode, commands for entering and exiting interface mode, for configuring and displaying
the switch clock, for displaying the version information of the switch system, etc.
Command Explanation
Normal User Mode/ Admin Mode
enable
disable
The User uses enable command to step into
admin mode from normal user mode. The
disable command is for exiting admin mode.
Admin Mode
config [terminal] Enter global mode from admin mode
Various Modes
Exit
Exit current mode and enter previous mode,
such as using this command in global mode
to go back to admin mode, and back to
normal user mode from admin mode
Admin Mode
calendar set
Set system date and time
Show version Display version information of the switch
set default Restore to the factory default
Write
Flash Memory
Save current configuration parameters to
Flash Memory
Reload Hot reset the switch
2.1.1 Commands for Basic Configuration
2.1.1.1 authentication login
Command : authentication login {local | radius | local radius | radius local}
no authentication login
Function: Configure the authentication mode and priority on Telnet Server for remote
login users; the “no authentication login” command restores to the default login