Accton Technology ES4626 - Manual (Page 404)

404
Command Mode: Interface Mode
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip receive-packet
13.4.3.15 ip rip receive version
Command: ip rip receive version { 1 | 2|1 2 }
no ip rip receive version
Function:
Set the version information of the RIP packets the interface receives. The
default version is 2; the “no ip rip receive version” command restores the value set by
using the version command.
Parameter: 1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands
for the RIP versions 1, 2.
Default: Version 2
Command Mode: Interface Mode
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip receive version 1 2
13.4.3.16 ip rip send-packet
Command: ip rip send-packet
no ip rip send-packet
Function:
Set the Interface to be able to receive the RIP packets; the “no ip rip
send-packet ” set the interface to be unable to receive the RIP packets.
Default: Interface sends RIP packets
Command Mode: Interface Mode
Example: Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip send-packet
13.4.3.17 ip rip send version
Command: ip rip send version { 1 | 2 | 1-compatible | 1 2}
no ip rip send version
Function: Set the version information of the RIP packets the interface receives. The
default version is 2; the “no ip rip send version” command restores the value set by
using the version command.
Parameter:
1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands
for the RIP versions 1, 2.