Accton Technology ES4626 - Manual (Page 284)

284
(3). Set IPv6 Static Routing
Command Description
Global mode
[no] ipv6 route <iPv6-prefix/prefix-length>
{<nexthop-Ipv6-address>|<interface-type
interface-number>|{<nexthop-Ipv6-address>
}} [distance]
Configure IPv6 static routing.
The NO command cancels
IPv6 static routing.
2. IPv6 Neighbor Discovery Configuration
（ 1）Configure DAD Neighbor Query Message number
Command Explanation
Interface Configuration Mode
[no] ipv6 nd dad attempts
<value>
Set the neighbor query message number sent
in sequence when the interface makes
repeating address check. The NO command
resumes default value (1).
（ 2）Configure Send Neighbor Query Message Interval
Command Explanation
Interface Configuration Mode
[no] ipv6 nd ns-interval
<seconds>
Set the interval of the interface to send
neighbor query message. The NO command
resumes default value (1 second).
（ 3）Forbid Router announce
Command Explanation
Interface Configuration Mode
[no] ipv6 nd suppress-ra
Forbid IPv6 Router Announce. The NO
command enables IPv6 router announce.
（ 4）Configure Router Announce Lifespan
Command Explanation
Interface Configuration Mode
[no] ipv6 nd ra-lifetime
<seconds>
Configure Router Announce Lifespan. The
NO command resumes default value (1800
seconds).