Accton Technology ES4626 - Manual (Page 115)

115
Parameter: None
Command Mode:
All Modes
Usage Guide: This command is used to acknowledge the operation state of sFlow
Switch#show sflow
Sflow version 1.2
Agent address is 172.16.1.100
Collector address have not configured
Collector port is 6343
Sampler priority is 2
Sflow DataSource: type 2, index 194(Ethernet3/2)
Collector address is 192.168.1.200
Collector port is 6343
Counter interval is 0
Sample rate is input 0, output 0
Sample packet max len is 1400
Sample header max len is 50
Sample version is 4
Displayed Information Explanation
Sflow version 1.2 Indicates the sFlow version is 1.2
Agent address is 172.16.1.100 Address of the sFlow sample proxy is 172.16.1.100
Collector address have not
configured
the sFlow global analyzer address is not configured
Collector port is 6343 the sFlow global destination port is the defaulted 6343
Sampler priority is 2 The priority of sFlow when receiving packets from the
hardware is 2.
Sflow DataSource: type 2,
index 194(Ethernet3/2)
One sample proxy data source of the sFlow is the
interface e3/1 and its type is 2 (Ethernet), the interface
index is 194.
Collector address is
192.168.1.200
The analyzer address of the sampling address of the
E3/1 interface is 192.168.1.200
Collector port is 6343 Default value of the port on E3/1 interface sampling
proxy is 6343.
Counter interval is 20 The statistic sampling interval on e3/1 interface is 20
seconds
Sample rate is input 10000,
output 0
The ingress traffic rate of e3/1 interface sampling proxy
is 10000 and no egress traffic sampling will be
performed
Sample packet max len is 1400 The length of the sFlow group data sent by the e3/1