Accton Technology ES4626 - Manual (Page 726)

726
Present
17.3.5.1.2 debug ipv6 mld packet
Command: debug ipv6 mld packet
no debug ipv6 mld packet
Function: Enable the debug switch that displays MLD packets.The “no debug ipv6
mld events ” command disables the debug switch.
Parameter: None
Default: Disabled
Command Mode:
Admin Mode
Usage Guide: This switch can be enabled to get MLD packets information.
Example:
Switch# deb ipv6 mld packet
Switch#1970/01/01 07:33:12 IMI: Recv MLD packet
1970/01/01 07:33:12 IMI: Type: Listener Report (131)
1970/01/01 07:33:12 IMI: Code: 0
1970/01/01 07:33:12 IMI: Checksum: 3b7a
1970/01/01 07:33:12 IMI: Max Resp Delay: 0
1970/01/01 07:33:12 IMI: Reserved: 0
1970/01/01 07:33:12 IMI: Multicast Address: ff1e::1:3
1970/01/01 07:33:12 IMI: MLD Report recv: src fe80::203:fff:fe12:3457 for ff1e::1:3
1970/01/01 07:33:12 IMI: Processing Report comes from Vlan1, ifindex 2003
1970/01/01 07:33:12 IMI: MLD(Querier) ff1e::1:3 (Vlan1): Listeners Present --> Listeners
Present
17.3.5.1.3 show ipv6 mld groups
Command: show ipv6 mld groups [{}]
Function:
Display the MLD group information
Parameter: is the name of the interface . Display the MLD group information.
is the group address. Display the specified group
information.
Default: Do not display
Command Mode: Admin Mode
Example:
Switch#sh ipv6 mld group
MLD Connected Group Membership
Group Address Interface Uptime Expires
ff1e::1:3 Vlan1 00:00:16 00:03:14