Accton Technology ES4626 - Manual (Page 196)

196
with the IP protocol or else some application may be affected
Example:
Assign the IP protocol data packet encapsulated by the EthernetII to VLAN200
Switch#config
Switch(config)#protocol-vlan mode ethernetii etype 2048 vlan 200
5.5.2.2.5 show dynamic-vlan prefer
Command: show dynamic-vlan prefer
Function: Display the preference of the dynamic VLAN
Parameter: None
Command Mode: Admin Mode
Usage Guide:
Display the dynamic VLAN preference
Example: Display current dynamic VLAN preference
Switch#show dynamic-vlan prefer
Mac Vlan/Voice Vlan
IP Subnet Vlan
Proto Vlan
5.5.2.2.6 show mac-vlan
Command: show mac-vlan
Function: Display the configuration of MAC-based VLAN on the switch
Parameter:
None
Command Mode: Admin Mode
Usage Guide: Display the configuration of MAC-based VLAN on the switch
Example: Display the configuration of the current MAC-based VLAN
Switch#show mac-vlan
MAC-Address VLAN_ID
------------------ -------
00-e0-4c-77-ab-9d 2
00-0a-eb-26-8d-f3 2
00-03-0f-11-22-33 5
5.5.2.2.7 show mac-vlan interface
Command: show mac-vlan interface
Function: Display the ports at MAC-based VLAN
Parameter: None
Command Mode: Admin Mode
Usage Guide: Display the ports at MAC-based VLAN
Example:
Display the ports currently at MAC-based VLAN
Switch#show mac-vlan interface