Accton Technology ES4626 - Manual (Page 200)

200
Figure 5-5 Typical topology application of dynamic VLAN
Configuration
Items
Configuration Explanation
MAC-based
VLAN
Global configuration on Switch A, Switch B, Switch C
Configuration procedure
Switch A, Switch B, Switch C:
Switch(Config)#mac-vlan mac 00-03-0f-11-22-33 vlan 100 priority 0
Switch(Config)#exit
5.5.4 Dynamic VLAN Troubleshooting
z On the switch configured with dynamic VLAN, if the two connected
equipment (e.g. PC) are both belongs to the same dynamic VLAN, first
communication between the two equipment may not be goes through. The
solution will be letting the two equipment positively send data packet to the
switch (such as ping), to let the switch learn their source MAC, then the two
equipment will be able to communicate freely within the dynamic VLAN
5.6 Voice VLAN Configuration
5.6.1 Voice VLAN Introduction