Accton Technology ES4626 - Manual (Page 406)

406
Function: This command is for entering a keychain manage mode and configure a
keychain. The “no key chain < name-of-chain >“ delete one keychain.
Parameter: is the name string of the keychain the length of which is
not specifically limited.
Command Mode: Global Mode
Example: Switch# config terminal
Switch(config)# key chain mychain
Switch(config-keychain)#
Relevant Commands: key, key-string, accept-lifetime, send-lifetime
13.4.3.21 key-string
Command: key-string
no key-string
Function: Configure a password corresponding to a key. The “no key-string
“ command delete the corresponding password.
Parameter:
is a character string without length limit. However when referred by
RIP authentication only the first 16 characters will be used.
Command Mode: Keychain-key mode
Usage Guide: This command is for configure different passwords for keys with different
ID.
Example: Switch# config terminal
Switch(config)# key chain mychain
Switch(config-keychain)# key 1
Switch(config-keychain-key)# key-string prime
13.4.3.22 maximum-prefix
Command: maximum-prefix []
no maximum-prefix
Function: Configure the maximum number of RIP routes in the route table. The “no
maximum-prefix
” command cancels the limit.
Parameter: the maximum number of RIP route, ranging between
1-65535; a warning is given when the number rate of current route exceeds
ranging between 1-100, default at 75
Command Mode: router mode
Usage Guide: The maximum RIP routes only limits the number of routes learnt through
RIP but not includes direct route or the RIP static route configured by the route command.
The base on which the comparison is performed is the number of route marked R in the
show ip route database, and also the number of RIP routes displayed in the show ip route