Accton Technology ES4626 - Manual (Page 26)

26
CLI interface is familiar to most users. As aforementioned, out-of-band management
and Telnet login are all performed through CLI interface to manage the switch.
CLI Interface is supported by Shell program, which consists of a set of configuration
commands. Those commands are categorized according to their functions in switch
configuration and management. Each category represents a different configuration mode.
The Shell for the switch is described below:
z Configuration Modes
z Configuration Syntax
z Shortcut keys
z Help function
z Input verification
z Fuzzy match support
1.2.2 Configuration Modes
Fig 1-12 Shell Configuration Modes
1.2.2.1 User Mode
On entering the CLI interface, entering user entry system first. If as common user, it
is defaulted to User Mode. The prompt shown is “Switch>“, the symbol “>“ is the prompt
for User Mode. When disable command is run under Admin Mode, it will also return to
the User Mode.
Under User Mode, no configuration to the switch is allowed, only clock time and
version information of the switch can be queries.
User Mode
Admin Mode
Global Mode
Interface Mode
Vlan Mode
DHCP
addr
e
ss pool
configuration
mode
Route configuration mode ACL
configuration
mode