Accton Technology ES4626 - Manual (Page 245)

245
Command: debug spanning-tree
no debug spanning-tree
Function: Enable the MSTP debugging information; The command “no debug
spanning-tree ” disables the MSTP debugging information
Command mode: Admin Mode
Usage Guide: This command is the general switch for all the MSTP debugging. Users
should enable the detailed debugging information, then they can use this command to
display the relevant debugging information. In general, this command is used by skilled
technicians.
Example: Enable to receive the debugging information of BPDU messages on the port
1/1
Switch#debug spanning-tree
Switch#debug spanning-tree bpdu rx interface e1/1
7.6 Web Management
Click “MSTP control” to enter MSTP control configuration mode to manage MSTP
features for the switch.
7.6.1 MSTP field operation
Click “MSTP control” to enter MSTP field operation.
7.6.1.1 Instance configuration
Click “MSTP control” to enter MSTP field operation, then Instance configuration.
Create the Instance and configure the VLAN-Instance mapping or add VLAN table
entry mapping to specified Instance.
Configure mapping between VLAN1-10;100-110 and Instance 1. Equivalent
command 1.2.1.3.
Set Instance name to 1, VLAN name to VLAN1-10;100-110. Click "Apply" to commit
the application.
7.6.1.2 Field operation
Click “MSTP control” to enter the MSTP field operation.
Configure MSTP field name under MSTSP field configuration mode.