Accton Technology ES4626 - Manual (Page 587)

587
BGP state = Established, up for 00:13:43
Last read 00:13:43, hold time is 240, keep alive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received (old and new)
Address family IPv4 Unicast: advertised and received
Received 17 messages, 0 notifications, 0 in queue
Sent 17 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP table version 2, neighbor version 2
Index 1, Offset 0, Mask 0x2
Community attribute sent to this neighbor (both)
0 accepted prefixes
1 announced prefixes
Connections established 7; dropped 6
13.8.5.1.10 show ip bgp paths
Command: show ip bgp [] paths
Function: Display the path message permitted by BGP
Parameter: : Address-family such as “ipv4 unicast”
Default: None
Command Mode: All modes
Usage Guide: Display the BGP path message includes the utilization state.
Example:
Switch#sh ip bgp paths
Address Refcnt Path
[0x331dad0:0] (1)
[0x331d850:93] (1) 600
[0x331d8d8:249] (2) 200 300
13.8.5.1.11 show ip bgp prefix-list
Command: show ip bgp [] prefix-list []
Function: For displaying the route meet the specific prefix-list in BGP.
Parameter:
: Address family such as “ipv4 unicast”
: Name of prefix-list
Default: None
Command Mode: All mode