9 show ip pim bsr-router, 10 show ip pim interface – Accton Technology ES4626 User Manual
Page 641
641
Usage Guide:
Enable the specified timer’s debug information.
Example:
Switch# debug ip pim timer assert
16.3.5.1.9 show ip pim bsr-router
Command: show ip pim bsr-router
Function:
Display BSR address
Parameter:
None
Default:
None
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display the BSR information maintained by the PIM.
Example:
show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 10.1.4.3 (?)
Uptime: 00:06:07, BSR Priority: 0, Hash mask length: 10
Next bootstrap message in 00:00:00
Role: Candidate BSR
State: Elected BSR
Next Cand_RP_advertisement in 00:00:58
RP: 10.1.4.3(Vlan1)
Displayed Information
Explanations
BSR address
Bsr-router Address
Priority Bsr-router
Priority
Hash mask length
Bsr-router hash mask length
State
The current state of this candidate BSR,
Elected BSR is selected BSR
16.3.5.1.10 show ip pim interface
Command: show ip pim interface
Function:
Display PIM interface information
Parameter:
None
Default:
None
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display PIM interface information
Example:
testS2(config)#show ip pim interface
Address Interface VIFindex Ver/ Nbr DR DR
Mode Count Prior