Accton Technology ES4626 - Manual (Page 804)

804
The stopped user num is: 0
The total user num is: 1
19.6 Web Management
Click “Authentication configuration”, to open authentication configuration
management list. Users may configure switch 802.1x authentication function.
19.6.1 RADIUS client configuration
Click “Authentication configuration”, “RADIUS client configuration”, to open Radius
client configuration management list Users may the configure switch Radius client.
19.6.1.1 RADIUS global configuration
Click “Authentication configuration”, “RADIUS client configuration”, “RADIUS global
configuration” to configure Radius global configuration information:
z Authentication status -Enables, disables switch AAA authentication function. Disable
radius Authentication, disable AAA authentication function; Enable radius
Authentication, enable
z AAA authentication function.
z Accounting Status -Enables, disables switch AAA accounting function. Disable
Accounting, disable accounting function; Enable Accounting, enable accounting
function.
z RADIUS key -Configures RADIUS server authentication key. （ includes
authentication and accounting）
z System recovery time (1-255 minutes) -Configures the recover time after RADIUS
server dead. Equivalent to 2.2.2.18.
z RADIUS Retransmit times (0-100) -Configures the number of RADIUS
authentication message retransmit times.
z RADIUS server timeout (1-1000 seconds) -Configures RADIUS server timeout
timer.
Example: Choose Authentication status as Enable radius Authentication, select
Accounting Status as Enable Accounting, configure RADIUS key as “aaa”, configure
System recovery time as 10 seconds, configure RADIUS Retransmit times as 5 times,
configure RADIUS server timeout as 30 seconds, and lastly, click Apply button. The
configuration will then be applied to the switch.