Accton Technology ES4626 - Manual (Page 129)

129
Users should save the current running-config by clicking “Switch maintenance”, “Save
current running-config” and “Apply”.
2.10.5.3 Reboot
Users should reboot the switch by clicking “Switch maintenance.”
2.10.5.4 Reboot with the default configuration
Users should clear all current configurations and reboot the switch again by clicking
“Switch maintenance” and “Reboot with the default configuration.”
2.10.6 Telnet server configuration
On the left directory of the root page, users may click “Telnet server configuration”
and configure the Telnet server configuration nodes through web interface.
2.10.7 Telnet server user configuration
Users should click “Telnet server configuration” and “Telnet server user
configuration” to configure Telnet service start-up and users information. Words and
phrases are explained in the following:
z Telnet server State-to choose from the drop-down list. (“Open” and “Close” service)
z User name-a specific name of the Telnet user
z Password-to configure a specific password
z Encrypted text-to configure whether the password is encrypted when displaying
configuration information.
z Operation-includes “Remove user” and “Add user”
Example: set the Telnet user name as “switch” and password as “switch” and then click
on the “Apply” button.
2.10.8 Telnet security IP