Accton Technology ES4626 - Manual (Page 418)

418
passed since the last route
update. The manage distance
is 120
Distance: (default is 120) Default manage distance is
120
13.4.5.1.3 show ip rip
Command: show ip rip
Function: Show the routes in the RIP route data base
Command Mode: Any mode
Example:
show ip rip
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B - BGP
Network Next Hop Metric From If Time
R 12.1.1.0/24 20.1.1.1 2 20.1.1.1 Vlan1 02:51
R 20.1.1.0/24 1 Vlan1
Amongst R stands for RIP route, namely a RIP route with the destination network
address 12.1.1.0, the network prefix length as 24, next-hop address at 20.1.1.1. It is
learnt from the Ethernet port E1/8 with a metric value of 2, and still has 2 minutes 51
seconds before time out.
13.4.5.1.4 show ip rip database
Command: show ip rip database
Function: Show the routes in the RIP route database
Command Mode: Any mode
Example: Switch# show ip rip database
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B -BGP
Network Next Hop Metric From If Time
R 10.1.1.0/24 1 Vlan1
R 20.1.1.0/24 1 Vlan2
Command: show ip rip
13.4.5.1.5 show ip rip database vrf
Command: show ip rip database vrf
Function: This command display the RIP database messages related to the VPN
routing/forwarding instances.