Accton Technology ES4626 - Manual (Page 546)

546
Network Next Hop Metric LocPrf Weight Path
*> 11.1.1.0/24 15.1.1.68 0 100 100 ?
*> 15.1.1.0/24 0.0.0.0 0 32768 ?
*> 20.1.1.0/24 15.1.1.68 0 100 100 ?
*> 100.1.1.0/24 0.0.0.0 0 32768 ?
Total number of prefixes 4
13.8.3.46 neighbor capability
Command: neighbor {|} capability {dynamic | route-refresh}
no neighbor {|} capability {dynamic | route-refresh}
Function: Configure dynamic update between neighbors and the route refresh
capability negotiation. The “no neighbor {|} capability {dynamic |
route-refresh} ” command do not enable the specific capability negotiation
Parameter: : Neighbor IP address
: Name of peer group
Default:
Not configure the dynamic update capability but the route refresh capability.
Command Mode: BGP route mode and address family mode
Usage Guide: This is an extended BGP capability. With this configuration supported
capabilities by both side will be negotiated in the OPEN messages, and the partner will
respond if this capability is supported by the partner and send NOTIFICATION if not. The
originating side will then send an OPEN excluded the capability to reestablish the
connection. The dynamic capability refers to when the address family negotiation
changes, the connection don’t have to be restarted. Route refresh refers to sending
refresh request when configuring some soft reconfigurable attributes and the partner will
retransmit the existing route to the originating side. With route refresh attribute, the
connection will not have to be restarted but be refreshed with the clear ip bgp * soft in
command.
Example:
Switch(config-router)#neighbor 10.1.1.64 capability dynamic
Switch(config-router)# no neighbor 10.1.1.64 capability route-refresh
13.8.3.47 neighbor capability orf prefix-list
Command: neighbor {|} capability orf prefix-list
{||}
no neighbor {|} capability orf prefix-list
{||}
Function:
Configure the out route filter capability negotiation between neighbors. The
“no neighbor {|} capability orf prefix-list