Accton Technology ES4626 - Manual (Page 539)

539
basis
Example:
Switch(config-router)# distance 90 10.1.1.64/32
13.8.3.32 distance bgp
Command: distance bgp <1-255> <1-255> <1-255>
no distance bgp [<1-255> <1-255> <1-255>]
Function: Set the BGP protocol manage distance. The “no distance bgp [<1-255>
<1-255> <1-255>]
” command restores the manage distance to default value
Parameter: Respectively the EBGP, IBGP and LOCAL manage distance of the BGP
Default: Default EBGP is 20, others are 200
Command Mode: BGP route mode .
Usage Guide: Set the manage distance for BGP routing as the NSM path selecting basis
Example:
Switch(config-router)# distance bgp 15 150 150
13.8.3.33 exit-address-family
Command: exit-address-family
Function: Exit the BGP address-family mode
Parameter: None
Default: None
Command Mode: BGP address-family mode
Usage Guide:
Use this command to exit the mode so to end the address-family
configuration when configuring address-family under BGP
Example:
Switch(config)#router bgp 100
Switch(config-router)#address-family ipv4 unicast
Switch(config-router-af)# exit-address-family
Switch(config-router)#
13.8.3.34 import map
Command: import map <map-name>
no import map <map-name>
Function: Use this command to configure the route-map regulations when introducing
routes into VRF
Parameter: is the route-map name used
Command Mode:
vrf mode
Usage Guide: Use the route map command route-map NAME permit|deny <1-65535> to