Accton Technology ES4626 - Manual (Page 161)

161
Collecting Whether status of port bound status machine is “collecting” or
not.
Distributing Whether status of port bound status machine is “distributing”
or not.
Defaulted Whether the local port is using default partner end parameter.
Expired Whether status of port receiving status machine is “expire” or
not.
Selected Whether the port is selected or not..
5. Display port-channel information for port-group1.
Switch# show port-group 1 port-channel
Port channels in the group 1:
-----------------------------------------------------------
Port-Channel: port-channel1
Number of port : 2 Standby port : NULL
Port in the port-channel :
Index Port Mode
------------------------------------------------------
1 Ethernet1/1 active
2 Ethernet1/2 active
Displayed information Explanation
Port channels in the
group
If port-channel does not exist, the above information will not
be displayed.
Number of port Port number in the port-channel.
Standby port Port that is in “standby” status, which means the port is
qualified to join the channel but cannot join the channel due
to the maximum port limit, thus the port status is “standby”
instead of “selected”.
4.4 Port Channel Example
Scenario 1: Configuring Port Channel in LACP.