Accton Technology ES4626 - Manual (Page 313)

313
1. Enable URPF
2. Display and debug URPF relevant information
1) Globally enable URPF
Command Explanation
Port mode
urpf enable
no urpf enable
Enable and disable URPF on layer 3
interface (interface vlan)
2) Display and debug URPF relevant information
Command Explanation
Admin mode
Debug urpf
no debug urpf
Enable the debugging information of the
URPF module, the “no” form of this
command disables the URPF debugging
information output
Show urpf
Display which layer 3 interfaces has
enabled with URPF
Show urpf interface
Display the URPF rules generated by
the interface or layer 2 interface
9.4.4 Commands For URPF
9.4.4.1 urpf enable
Command: urpf enable
no urpf enable
Function:
Enable URPF on layer 3 interface, the “no” form of this command disables the
URPF enabled on this interface
Command Mode: Interface Mode
Default: URPF protocol not enabled by system default
Example: Enable urpf on interface vlan2
Switch(Config)#interface vlan 2
Switch(Config-if-Vlan1)#urpf enable
9.4.4.2 show urpf
Command: show urpf
Function: Display which interfaces have been enabled with urpf function
Command Mode: Admin mode
Example: Switch#show urpf