Accton Technology ES4626 - Manual (Page 443)

443
ip ospf transit-delay <time>
no ip ospf transit-delay
Sets the delay time before sending link-state
broadcast; the “no ip ospf transmit-delay”
command restores the default setting.
ip ospf retransmit <time>
no ip ospf retransmit
Sets the interval for retransmission of
link-state advertisement among neighbor
layer3 switches; the “no ip ospf retransmit”
command restores the default setting.
（2）Configure OSPF route introduction parameters
Configure the routes of the other protocols to introduce to OSPF.
Command Explanation
OSPF protocol configuration mode
redistribute { bgp | connected | static
| rip | kernel} [ metric-type { 1 | 2 } ]
[ tag ] [ metric ]
[router-map ]
no redistribute { bgp | connected |
static | rip | kernel }
Distribute other protocols to find routing
and static routings as external routing
messages the no redistribute { bgp |
connected | static | rip | kernel }
command cancels the distributed external
messages.
（3）Configure other OSPF protocol parameters
1）configure how to calculate OSPF spf algorithm time
2）configure the LSA limit in the OSPF link state database
3）Configure various OSPF parameters
Command Explanation
OSPF protocol configuration mode
timers spf <interval>
no timers spf
configure the SPF timer of OSPF; the
no timers spf command restores the
default settings
overflow database {<max-LSA> [hard |
soft] | external <max-LSA> <recover
time>}
no overflow database [external <
max-LSA > < recover time >]
Configure the LSA limit in current
OSPF process database; the no
overflow database [external <
max-LSA > < recover time >]
command restores the default
settings.