Accton Technology ES4626 - Manual (Page 509)

509
Usage Guide: OSPF neighbor state can be checked by viewing the output of this
command
Example:
OSPFv3 Process (*null*)
Neighbor ID Pri State Dead Time Interface Instance ID
192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0
192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1
Displayed information Explanation
Neighbor ID Neighbor ID
Instance ID Instance ID
Address IP address of neighboring layer 3 switch
Interface Interface the neighbor belongs
State Neighbor relationship state
Pri Priority
13.7.5.1.11 show ipv6 ospf route
Command: show ipv6 ospf [] route
Function: Show the OSPF route table messages
Parameter: is the processes tag, which is a character string
Default: Not displayed
Command Mode: All modes
Example:
Switch#show ipv6 ospf route
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
E1 - OSPF external type 1, E2 - OSPF external type 2
Destination Metric
Next-hop
O 2000:1:1::/64 10
directly connected, Vlan2
O 2001:1:1::/64 10
directly connected, Vlan1
O 3000:1:1::/64 20
via fe80::203:fff:fe01:429e, Vlan2
O 3003:1:1::/64 20
via fe80::203:fff:fe01:d28, Vlan1
13.7.5.1.12 show ipv6 ospf topology
Command: show ipv6 ospf [] topology [area
]