Accton Technology ES4626 - Manual (Page 28)

28
command under
Global Mode.
duplex mode,
speed, etc.
of Ethernet
Port.
return to
Global Mode.
port-channel
Type interface
port-channel
mber> command
under Global
Mode.
Switch(Config-if-
port-channelx)#
Configure
port-channel
related
settings such
as duplex
mode, speed,
etc.
Use the exit
command to
return to
Global Mode.
1.2.2.5 VLAN Mode
Using the vlan command under Global Mode can enter the corresponding
VLAN Mode. Under VLAN Mode the user can configure all member ports of the
corresponding VLAN. Run the exit command to exit the VLAN Mode to Global Mode.
1.2.2.6 DHCP Address Pool Mode
Type the ip dhcp pool command under Global Mode will enter the DHCP
Address Pool Mode prompt “Switch(Config--dhcp)#”. DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the exit command to
exit the DHCP Address Pool Mode to Global Mode.
1.2.2.7 Route Mode
Routing
Protocol
Entry Prompt Operates Exit
RIP
Routing
Protocol
Type router
rip
command
under
Global
Mode.
Switch(Config-Router-Rip)# Configure
RIP protocol
parameters.
Use the
“exit”
command to
return to
Global
Mode.
OSPF
Routing
Protocol
Type router
ospf
command
under
Global
Switch(Config-Router-Ospf)# Configure
OSPF
protocol
parameters.
Use the
“exit”
command to
return to
Global