Accton Technology ES4626 - Manual (Page 304)

304
size <64> Size of data report
proto <58> Protocol field in IPv6 header
from Vlan1 IPv6 data report is collected from Layer 3
port vlan1
9.2.4.1.4 debug ipv6 icmp
Command：[no] debug ipv6 icmp
Function： ICMP data packets receive/send debug message.
Parameter： None
Default： None
Command Mode： Admin Mode
Example：
Switch#debug ipv6 icmp
IPv6 ICMP: sent, type <129>, src <2003::1>, dst <2003::20a:ebff:fe26:8a49> from Vlan1
Displayed information Explanation
IPv6 ICMP: sent Send IPv6 data report
type <129> Ping protocol No.
Src <2003::1> Source IPv6 address
Dst <2003::20a:ebff:fe26:8a49> Destination IPv6 address
from Vlan1 Layer 3 port being sent
9.2.4.1.5 debug ipv6 nd
Command：[no] debug ipv6 nd
Function： ND data packets receive/send debug message.
Parameter： None
Default：
None
Command Mode： Admin Mode
Example：
Switch#debug ipv6 nd
IPv6 ND: rcvd, type <136>, src , dst
Displayed information Explanation
IPv6 ND: rcvd Receive ND data report
type <136> ND Type
Src Source IPv6 address
Dst Destination IPv6 address
9.2.4.1.6 debug ipv6 tunnel packet
Command：[no] debug ipv6 tunnel packet