beautypg.com

4 ecscm configuration examples – Accton Technology ES4626 User Manual

Page 666

background image

666

Function:

Configure multicast source control access-list used on interface, the “no ip

multicast source-control access-group <5000-5099>“ command deletes the configuration.

Parameter:

<5000-5099>: Source control access-list number.

Default:

None

Command Mode:

Interface Configuration Mode

Usage Guide:

The command configures with only enabling global multicast source

control. After that, it will match multicast data message imported from the interface

according to configured access-list, such as matching: permit, the message will be

received and forwarded; otherwise the message will be thrown away.

Example:

Switch(Config-If-Ethernet )#ip multicast source-control access-group 5000

16.5.4 ECSCM Configuration Examples

1. Source Control

In order to prevent an Edge Switch from putting out multicast data ad asbitsium, we

configure Edge Switch so that only the switch at port Ethernet1/5 is allowed to transmit

multicast, and the data group must be 225.1.2.3. Also, switch connected up to port

Ethernet1/10 can transmit multicast data without any limit, and we can make the following

configuration.

EC(config)#access-list 5000 permit ip any host 225.1.2.3

EC(config)#access-list 5001 permit ip any any

EC(config)#ip multicast source-control

EC(config)#interface ethernet1/5

EC(Config-If-Ethernet1/5)#ip multicast source-control access-group 5000

EC(config)#interface ethernet1/10

EC(Config-If-Ethernet1/10)#ip multicast source-control access-group 5001

2. Destination Control

We want to limit users with address in 10.0.0.0/8 network segment from entering the

group of 238.0.0.0/8, so we can make the following configuration:

Firstly enable IGMP snooping in the VLAN it is located (Here it is assumed to be in

VLAN2)

EC(config)#ip igmp snooping

EC(config)#ip igmp snooping vlan 2

After that, configure relative destination control access-list, and configure specified

IP address to use that access-list.

Switch(config)#access-list 6000 deny ip any 238.0.0.0 0.255.255.255

Switch(config)#access-list 6000 permit ip any any

Switch(config)#ip multicast destination-control

This manual is related to the following products: