Accton Technology ES4626 - Manual (Page 444)

444
area {authentication
[message-digest] | default-cost <cost> |
filter-list {access | prefix} <WORD> {in |
out} | nssa [default-information-originate
| no-redistribution | no-summary |
translator-role] | range <range> |
shortcut {default | disable | enable} |
stub [no-summary] | virtual-link
<neighbor>}
no area {authentication |
default-cost | filter-list {access | prefix}
<WORD> {in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> |
shortcut { disable | enable} | stub
[no-summary] | virtual-link <neighbor>}
Configure the parameters in OSPF
area (STUB area, NSSA area and
virtual links); the no area
{authentication | default-cost |
filter-list {access | prefix} <WORD>
{in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> |
shortcut { disable | enable} | stub
[no-summary] | virtual-link
<neighbor>} command restores the
default settings.
4）Configure the priority of the interface when electing designated layer3 switch (DR).
command explanation
interface configuration mode
ip ospf priority <priority>
no ip ospf priority
Sets the priority of the interface in “designated
layer3 switch” election; the no ip ospf
priority command restores the default
setting.
3. Disable OSPF protocol
command explanation
Global mode
no router ospf [process <id>] Disables OSPF routing protocol
13.6.3 Commands for OSPF
13.6.3.1 area authentication
Command: area <id> authentication [message-digest]
no area <id> authentication
Function: Configure the authentication mode of the OSPF area; the “no area <id>
authentication ” command restores the default value.