Accton Technology ES4626 - Manual (Page 321)

321
(2) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address
[mask | prefix-length]
no network-address
Configures the address scope that can be
allocated to the address pool
default-router
[address1[address2[…address8]]]
no default-router
Configures default gateway for DHCP
clients
dns-server
[address1[address2[…address8]]]
no dns-server
Configures DNS server for DHCP clients
domain-name
no domain-name
Configures Domain name for DHCP
clients; the “no domain-name” command
deletes the domain name.
netbios-name-server
[address1[address2[…address8]]]
no netbios-name-server
Configures the address for WINS server
netbios-node-type
｛b-node|h-node|m-node|p-node|
e-number>｝
no netbios-node-type
Configures node type for DHCP clients
bootfile
no bootfile
Configures the file to be imported for
DHCP clients on boot up
next-server
[address1[address2[…address8]]]
no next-server
[address1[address2[…address8]]]
Configures the address of the server
hosting file for importing
option {ascii | hex
| ipaddress }
no option
Configures the network parameter
specified by the option code
lease (infinite | <0-365>days
(<0-23>hours (<0-59>minutes|)|))no
lease
Configures the lease period allocated to
addresses in the address pool
Global Mode