Accton Technology ES4626 - Manual (Page 633)

633
range and configure PIM-SM static RP information. Attention, when computing rp, BSR
RP is selected first. If it doesn’t succeed, static RP is selected.
Example: Configure vlan1 as candidate RP announcing sending interface globally.
Switch (Config)# ip pim rp-address 10.1.1.1 238.0.0.0/8
16.3.3.17 ip pim rp-candidate
Command: ip pim rp-candidate { vlan < vlan-id >| } [<A.B.C.D/M>]
[]
no ip pim rp-candiate
Function: This command is the candidate RP global configure command, it is used to
configure PIM-SM candidate RP information in order to compete RP router with other
candidate RPs. The “no ip pim rp-candiate” command cancels the candidate RP.
Parameter: vlan-id isVlan ID;
ifname is the name of the specified interface;
A.B.C.D/M is the ip prefix and mask;
is the RP selection priority, it ranges from 0 to 255, the default value is
192, the lower value has more priority.
Default: This switch is not a RP static router.
Command Mode: Global Mode
Usage Guide: This command is the candidate RP global configure command, it is used
to configure PIM-SM candidate RP information in order to compete RP router with other
candidate RPs.Only this command is configured, this switch is the RP candidate router.
Example:
Configure vlan1 as the sending interface of candidate RP announcing sending
messages
Switch (Config)# ip pim rp-candidate vlan1 100
16.3.3.18 ip pim rp-register-kat
Command: ip pim rp-register-kat <vaule>
no ip pim rp-register-kat
Function: This command is to configure the KAT（KeepAlive Timer）value of the RP（S,
G）items, the unit is second. The “no ip pim rp-register-kat” command restores the
default value.
Parameter: <vaule> is the timer value, it ranges from 1 to 65535s.
Default: 185s
Command Mode: Global Mode
Usage Guide: This command is to configure the RP’s keep alive time, during the keep
alive time RP’s （S,G）item will not be deleted because it hasn’t received REGISTER
packets. If no new REGISTER packet is received when the keep alive time is over, this