Accton Technology ES4626 - Manual (Page 125)

125
9 FTP client service -to configure FTP client
9 FTP server service -to configure FTP server
2.10.3.1 TFTP client configuration
Users should click “Switch basic configuration” and “TFTP client service” to enter into the
configuration page.
Words and phrases are explained in the following:
Server IP address-IP address of the server.
Local file name-the local file name
Server file name-the file name of the server
Operation type-”Upload” means to upload files; “Download” means to download files
Transmission type-”ascii” means to transit files by using ASCII standard. “binary” means
the files are transmitted in the binary standard
Example: the Figure below shows how to get the system file from TFTP Server 10.1.1.1,
which has server file name is “nos.img” and local file name “nos.img.” Click “Apply” to
finish.
2.10.3.2 TFTP server configuration
Users should click “Switch basic configuration” and “TFTP server service” to enter into
the configuration page.
Words and phrases are explained in the following:
Server state-status of the server. (“Open” or “Close”)
TFTP Timeout-the timeout.
TFTP Retransmit times-times of retransmission.
Users should open the TFTP server, and choose “Open” and then click “Apply.”