Accton Technology ES4626 User Manual
Page 663
663
Command: ip multicast destination-control access-group <6000-7999>
no ip multicast destination-control access-group <6000-7999>
Function:
Configure multicast destination-control access-list used on interface, the “no
ip multicast destination-control access-group <6000-7999>
“ command deletes the
configuration.
Parameter:
<6000-7999>: destination-control access-list number.
Default:
None
Command Mode:
Interface Configuration Mode
Usage Guide:
The command is only working under global multicast destination-control
enabled, after configuring the command, if IGMP-SPOOPING is enabled, for adding the
interface to multicast group, and match configured access-list, such as matching: permit,
the interface can be added, otherwise do not be add.
Example:
Switch(config)#inter e
Switch(Config-If-Ethernet )#ip multicast destination-control access-group 6000
16.5.3.4 ip multicast destination-control access-group (vmac)
Command: ip multicast destination-control <1-4094>
<6000-7999>
no ip multicast destination-control <1-4094>
<6000-7999>
Function:
Configure multicast destination-control access-list used on specified vlan-mac,
the “no ip multicast destination-control <1-4094>
<6000-7999>
“ command deletes this configuration.
Parameter:
<1-4094>: VLAN-ID;
is “xx-xx-xx-xx-xx-xx”;
<6000-7999>: Destination-control access-list number.
Default:
None
Command Mode:
Global Mode
Usage Guide:
The command is only working under global multicast destination-control
enabled, after configuring the command, if IGMP-SPOOPING is enabled, for adding the
members to multicast group. If configuring multicast destination-control to source MAC
address of transmitted igmp-report, and match configured access-list, such as matching:
permit, the interface can be added, otherwise do not be add.
Example:
Switch(Config)#ip multicast destination-control 1 00-01-03-05-07-09 access-group 6000
16.5.3.5 ip multicast destination-control access-group (sip)