Accton Technology ES4626 - Manual (Page 733)

733
Example: Switch(config)#ipv6 mld snooping vlan 2 mrpt 100
17.4.3.9 ipv6 mld snooping vlan query-interval
Command: ipv6 mld snooping vlan <vlan-id> query-interval <value>
no ipv6 mld snooping vlan <vlan-id> query-interval
Function: Configure the query interval
Parameter: vlan-id : vlan id, the valid range is <1-4094>
value：query interval, valid range: <1-65535>secs.
Command Mode:
Global Mode
Default: 125s
Usage Guide: It is recommended to use default value and if layer 3 MLD is in operation,
please make this configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-interval 130
17.4.3.10 ipv6 mld snooping vlan query-mrsp
Command: ipv6 mld snooping vlan <vlan-id> query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-mrsp
Function: Configure the maximum query response period. The “no” form of this
command restores the default value.
Parameter: vlan-id : vlan id, the valid range is<1-4094>
value：query interval, the valid range is <1-25> secs .
Command Mode:
Global Mode
Default: 10s
Usage Guide: It is recommended to use default value and if layer 3 MLD is in operation,
please make this configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-mrsp 18
17.4.3.11 ipv6 mld snooping vlan query-robustness
Command: ipv6 mld snooping vlan query-robustness <value>
no ipv6 mld snooping vlan query-robustness
Function: Configure the query robustness; the “no” form of this command restores to the
default value
Parameter: vlan-id : vlan id, the valid range is <1-4094>
value：query interval, the valid range is <2-10>secs.
Command Mode:
Global Mode
Default: 2