Accton Technology ES4626 - Manual (Page 586)

586
13.8.5.1.8 show ip bgp inconsistent-as
Command: show ip bgp []inconsistent-as
Function: For displaying routes with inconsistent BGP AS
Parameter: : address family such as “ipv4 unicast”
Default: None
Command Mode:
All modes
Usage Guide: If same prefix comes from different origin AS, the AS will be regarded as
inconsistent. This command is for displaying this kind of routes.
Example:
Switch#sh ip bgp inconsistent-as
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.68 0 0 300 ?
*> 10.1.1.64 0 0 100 ?
Total number of prefixes 1
13.8.5.1.9 show ip bgp neighbors
Command:show ip bgp [] neighbors [IP-ADDRESS]
[advertised-routes|received {prefix-filter|routes}|routes]
Function: For displaying the BGP neighbor related messages
Parameter: : Address-family, such as “ipv4 unicast”
: Neighbor IP address
Default: None
Command Mode: All mode
Usage Guide: Display detailed messages of all neighbors by this command without
parameters. Specifying IP address will show the detailed information of the neighbors
with specified IP address. The advertised-routes、received prefix-filter、received routes、
routes parameters will respectively displays the routes broadcast on local side, the
received prefix filter, received routes (soft reconfiguration enabled) and the routing
message from specific neighbor
Example:
Switch#sh ip bgp neighbor
BGP neighbor is 10.1.1.66, remote AS 200, local AS 100, external link
BGP version 4, remote router ID 11.1.1.100