Accton Technology ES4626 - Manual (Page 806)

806
where “0” means that it’s not work as authentication server.
Primary accounting server -Primary Accounting server, is the primary server;
Non-Primary Accounting server, is the non-primary server.
Operation type -Add accounting server, adds an accounting server; Remove accounting
server, removes an accounting server
Example: Configure Accounting server IP as 10.0.0.1, Accounting server port as default
port, choose Primary accounting server, choose Operation type as “Add accounting
server” and then click Apply button to add the accounting server.
19.6.2 802.1X configuration
Click “Authentication configuration”, “802.1X configuration” to open the 802.1x
function configuration management list and configure the switch 802.1x function.
19.6.2.1 802.1X configuration
Click “Authentication configuration”, “802.1X configuration”, “802.1X configuration” to
configure the 802.1x global configurations:
z 802.1x status -Enables, disables the switch 802.1x function.
z Maximum retransmission times of EAP-request/identity(1-10 second) - Configures
sending EAP-request/MD5 frame the maximum times before switch did not receive
suppliant response and restart authentication.
z Re-authenticate client periodically - permit, forbid to make seasonal
re-authentication for suppliant.
z Holddown time for authentication failure(1-65535 second) - Configures suppliant
quiet-period status time after authentication failure.
z Re-authenticate client interval(1-65535 second) - Configures time interval of switch
re-authentication client.
z Resending EAP-request/identity interval(1-65535 second) - Configures time interval
of switch retransfer EAP-request/identity frame to suppliant.