Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 87)

Functional Description
ATCA-8310 Installation and Use (6806800M72E) 87
4.4.8 Configuration Identifier
4.4.8.1 Base Board and Module Slot Identifier
The Base Board and Module Slot Identifier (BASE_ID) delivers information about the position
and the address of a FPGA and is used for bit stream check and output buffer activation of the
FPGA.
The BASE_ID is readable by the BaseIdReg (Address: 0xC5) of the DSP-FPGA
4.4.8.2 Module Functional Identifier
The Module Functional Identifier (MOD_ID) delivers information about the functionality of the
DSP Mezzanine Card.
The MOD_ID is readable by the ModuleFunctionalIdReg (Address: 0xC6) of the DSP-FPGA.
Table 4-5 BASE_ID
BASE_ID<3..0> Description
0b1100 DSP-FPGA on base board (DMC0)
0b1101 DSP-FPGA on mezzanine card 1 (DMC1)
0b1110 DSP-FPGA on mezzanine card 2 (DMC2)
0b1111 GLUE-FPGA on base board (for internal use only)
All others reserved
Table 4-6 MOD_ID
MOD_ID<3..0> Description
0b0000 Reserved
0b0001 2 DSP available
0b0010 5 DSP available
0b0011 10 DSP available
All others reserved