Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 27)

ATCA-8310 Installation and Use (6806800M72E) 27
About this Manual
Overview of Contents
This Reference Guide is intended for users qualified in electronics or electrical engineering.
Users must have a working understanding of Peripheral Component Interconnect (PCI),
AdvancedTCA®, and telecommunications.
The manual contains the following chapters and appendices:
 About this Manual on page 27 lists all conventions and abbreviations used in this manual
and outlines the revision history.
 Safety Notes on page 445 lists safety notes applicable to the blade.
 Sicherheitshinweise on page 449 provides the German translation of the safety notes
section.
 Introduction on page 35 describes the main features of the blade.
 Hardware Preparation and Installation on page 41 outlines the installation requirements,
hardware accessories, switch settings, installation and removal procedures.
 Controls, Indicators, and Connectors on page 55 describes external interfaces of the blade.
This includes connectors and LEDs.
 Functional Description on page 71 describes the functional blocks of the blade in detail.
This includes a block diagram, description of the main components used and so on.
 U-Boot on page 163 describes the features and setup of BIOS.
 Intelligent Peripheral Management Controller on page 201 lists all supported IPMI
commands.
 Replacing the Battery on page 439 provides the battery exchange procedures.
 Related Documentation on page 443 provides links to further blade-related
documentation.