Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 197)

U-Boot
ATCA-8310 Installation and Use (6806800M72E) 197
TermSrv / 0x17 Performs test on the
terminal server. ALIVE The alive indication signal from the
terminal server did not toggle.
LINK No network link on port 2 of the
base switch.
SRIO / 0x26 Tests the SRIO
communication between
P4080 and TSI572 Port 0 down SERDES link of SRIO port 0 to SRIO
switch down.
Port 1 down SERDES link of SRIO port 1 to SRIO
switch down.
Loopback Loopback test failed (P4080/port0
-> SRIO switch/port1 -> SRIO
switch/port0 -> P4080/port1)
IPMI / 0x24 Basic IPMI/KCS test GET_DEVICE_ID The IPMC did not respond to a "Get
Device ID" command.
ACS8520 / 0x23 Tests access to ACS8520
telecom clock device DEVICE_ID Error reading the device ID register
via the P4080 SPI interface.
walking-one Walking-one test on ACS8520
register failed.
Table 6-10 POST Tests and Description (continued)
Test Name / Event Data
Byte 3
Description errorId Description