Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 223)

Intelligent Peripheral Management Controller
ATCA-8310 Installation and Use (6806800M72E) 223
Table 7-5 Artesyn ECC MAC Address Descriptor
Offset Length Description
0 1 Interface Type. Refer to Table 7-6 on page 223 .
1 1 Length Identifier (for example: 6 = 48 bit MAC, 8 = WWPN)
2 1 MAC Address Count (M) (specifying a continuous pool of MAC
addresses starting with the MAC address specified in this
descriptor)
M = 1: this descriptor specifies one MAC address
M > 1: this descriptor specifies a pool of MAC addresses with M
count
3 6 MAC Address. (Canonical form, the LSB (least significant bit) first.
Table 7-6 Interface Type Assignments
Interface Type Description
01h ATCA Base Interface
02h ATCA Fabric Interface
03h Front/Rear Panel
04h Mezzanine Module
05h Serial over LAN (SOL)
06h Fibre Channel / WWPN
07h AMC/MicroTCA Common Options Region
08h AMC/MicroTCA Fat Pipe Region
09h AMC/MicroTCA Extended Fat Pipe Region
10h ATCA Update Channel
11h Multi-type (Base, Fabric, and Update channel (or two types of it) are
connected to a onboard switch)
11h - FFh reserved