Table 8-133, Fault event status register, Cpld and fpga – Artesyn ATCA-8310 Installation and Use (May 2014) User Manual
Page 329
CPLD and FPGA
ATCA-8310 Installation and Use (6806800M72E)
329
Local Healthy is true (Bit 3 of
Table "Failover Status Registers" on page 328
is 0), when all event
are not set.
2
Ignore HEALTHY_NEG_IN;
0: Normal Operation. Local Blade state (Active or Standby)
depends on state of Remote Blade (signal HEALTHY_NEG_IN).
1: Ignore HEALTHY_NEG_IN. Local Blade is active. Used only for
testing.
PWR_G
OOD:0
SPP: r/w
7:3
Reserved
0
r
Table 8-133 Fault Event Status Register
Address Offset: 0x82 - 0x83
Bit Description
Default
Access
0
SPP Watchdog expired:
0: No event
1: SPP Watchdog expired
0
SPP: r/w1c
1
Software Fault 1:
0: No event
1: Software Fault 1 occurred.
0
SPP: r/w1c
2
Software Fault 2:
0: No event
1: Software Fault 2 occurred.
0
SPP: r/w1c
3
Software Fault 3:
0: No event
1: Software Fault 3 occurred.
0
SPP: r/w1c
4
Software Fault 4:
0: No event
1: Software Fault 4occurred.
0
SPP: r/w1c
Table 8-132 Failover Control Registers
Address Offset: 0x81
Bit Description
Default
Access