Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 40)

Introduction
ATCA-8310 Installation and Use (6806800M72E) 40
1.5 Ordering Information
The following table lists the blade variants that are available upon release of this publication.
Consult your local Artesyn Embedded Technologies sales representative for the availability of
other variants.
The following table lists the blade accessories that are available upon release of this
publication. Consult your local sales representative for the availability of other accessories.
Table 1-3 Blade Variants
Product Name Description
ATCA-8310-IA-T0 ATCA DSP blade with X86 processor, 0x TMS320TCI6486 DSP - BOM will
be created on customer request
ATCA-8310-IA-T5 ATCA DSP blade with X86 processor, 5x TMS320TCI6486 DSP installed,
and 2 free mezzanine sites
ATCA-8310-IA-T10 ATCA DSP blade with X86 processor, 10x TMS320TCI6486 DSP installed,
and 2 free mezzanine sites
ATCA-8310-IA-T20 ATCA DSP blade with X86 processor, 20x TMS320TCI6486 DSP - BOM will
be created on customer request
ATCA-8310-IA-T30 ATCA DSP blade with X86 processor, 30x TMS320TCI6486 DSP - BOM will
be created on customer request
Table 1-4 Blade Accessories
Accessory Description
831X-MEZZ-T10 DSP mezzanine module for ATCA-8310 with 10x TMS320TCI6486
installed
ARTM-831X-IP ARTM-831X-2X10GE-4X1GBE
SM-BBS-WR-ATCA-8310 Basic Blade Services software and SRstackware protocols based on MGEL
- CD media only
RJ45-DSUB-ATCA7140 RJ-45 DSUB cable for the ATCA-7140, 7150, 7350, 736X