4 switch settings – Artesyn ATCA-8310 Installation and Use (May 2014) User Manual
Page 48
Hardware Preparation and Installation
ATCA-8310 Installation and Use (6806800M72E)
48
2.4
Switch Settings
The blade provides several configuration switches. Their location is shown in
.
Blade Malfunction
Switches marked as "'Reserved" may carry production-related functions and may cause the
blade to malfunction if their setting is changed.
Therefore, do not change settings of switches marked as "'Reserved". The setting of switches
which are not marked as "'Reserved" has to be checked and changed before blade
installation.
Blade Damage
Setting/resetting the switches during operation can cause blade damage.
Therefore, check and change switch settings before you install the blade.
All DIP-switches are for debugging purposes only. For normal operation they have to stay in
the off position.