Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 196)

U-Boot
ATCA-8310 Installation and Use (6806800M72E) 196
RTC / 0x16 Performs tests on the
realtime clock RD_ERR Read access to the RTC failed
STUCK The RTC is not counting.
VALUE The seconds counter did not
advance as expected
SPEED The number of CPU ticks counted
within one RTC second is wrong.
BCM switch / 0x1E Tests on the Broadcom
switch not found The switch device was not found on
the PCIe interface
read device id A bad device ID was read
PCI Memory Read/write test on PCI BAR0 failed.
RTM_BASE / 0x40 Tests the RTM baseboard SPI The base extender FPGA on the
RTM could not be accessed via SPI.
TSI_INIT The TSI FPGA on the RTM was not
properly initialized.
PCI The TSI FPGA on the RTM was not
found on the PCIe interface.
WRITE SPI error writing to the base
extender FPGA
READ SPI error while reading from the
base extender FPGA
WWERR Error performing a walking-one bit
test on the base extender FPGA
RTM_TSI / 0x40 Performs tests on the
RTM TSI FPGA CMEM Read/write test on the connection
memory failed.
RTM_EXT / 0x40 Performs tests on the
RTM extender FPGA WRITE SPI error writing to the extender
FPGA
READ SPI error while reading from the
extender FPGA
WWERR Error performing a walking-one bit
test on the extender FPGA
Table 6-10 POST Tests and Description (continued)
Test Name / Event Data
Byte 3
Description errorId Description