Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 35)

Chapter 1
ATCA-8310 Installation and Use (6806800M72E) 35
Introduction
1.1 Features
The ATCA-8310 is a Media Gateway on a blade architecture with on-board packet and control-
plane processing options.
Main features:
 Single slot ATCA form factor (280mm x 322mm)
 Up to 30 TNETV3020 DSPs provide up to 16,000 ports of TDM -> IP conversion
 Build options for 0 or 5 TNETV 3020 DSP on baseboard
 Mezzanine sites supporting 5 or 10 TNETV3020 DSP per mezzanine
 Freescale P4080 for local setup, call control, and load balancing
 Build option for Intel Arrandale+ECC CPU with on-board mass storage for localized call
agent.
 10G fabric interface with multiple non-blocking internal data paths
 Clock termination and sync
 Architecture-ready for next generation TNETV3030 DSP
 External Connectivity
– Wireline I/O RTM (different RTM)
– 8x OC/3 or 2 x OC/12 line terminations for voice traffic
– APS line and equipment protection
– 8x T1/E1 line terminations for local signaling
– BITS clock termination
– 4x GbE for direct VoIP connection also for Sigtran (signaling)
– 4x GbE for direct VoIP connection also for Sigtran (signaling)
– 24x DS3
– 1x 10GigE SFP+